ASTM A182 Stainless Steel 310H Flanges Manufacturer In India

ASTM A182 Stainless Steel 310H Flanges

ASTM A182 310H SS Plate Flange, Werkstoff No 1.4841 SS Socket Weld Flanges, 310H SS Lapped joint Flanges, SS ASTM A182 F310H Threaded Flanges, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Stainless Steel 310H Forged Flanges in Mumbai, India.

Stockist of SS 310H Slip On Flanges, SS UNS S31000 Pipe Flanges, Global Supplier of SS 310H Weld Neck Flange, SS F310H Flange, Stainless Steel 310H Flanges, SS 310H Blind Flanges Dealer in India, ANSI B16.5 SS 310H Orifice Flanges, BS10 Table D, Table E, DIN Standard Flanges.

Regal Sales Corporation is one of the recommended manufacturer Of ASTM A182 Stainless Steel 310H Flanges In India. Our Stainless Steel 310H Flanges has good resistance to oxidation at temperatures of up to 1040°C (1904°F) in intermittent service and 1150°C (2102°F) in continuous service. Type SS 310H Lap Joint Flanges has carbon content and is a preferred choice for high temperature applications. Type Stainless Steel 310H Blind Flanges (BLRF) has a carbon maximum is 0.030. Stainless Steel 310H Plate Flanges is widely used in environments where sulfur dioxide gas is present at high temperatures; however it is recommended that this steel should not be continuously used at 425-860°C (797-1580°F) range due to carbide precipitation. 310H Stainless Steel Slip On Flange (SORF) is the most versatile and widely used alloy 310H Flat Face Flange is mostly used in the stainless steel flange family.

The ultimate tensile strength (UTS) of SS 310H Spectacle Blind Flange is roughly 85 ksi (~586 MPa),310H having a 0.2% yield strength of 35 ksi (~241 MPa).The carbon ranges are 0.08% maximum for the SS 310H Threaded Flange. All other element ranges are essentially the same (nickel range for 304 is 8.00-10.50% and for SS 310H Welding Neck Flange(WNRF) 8.00-12.00%).

310H Stainless Steel Collar Flange, also known as 18/8 Stainless Flange, is the most common stainless steel flange. SS 310H Ring Type Joint Flange (RTJ) (austenitic stainless steel) is a low carbon version of 304 and is melted as AOD, AOD + VAR, or VIM + VAR melt type. This grade offers a good combination of strength, corrosion resistance, and fabricability. The low carbon helps improve weldability as compared to the 304 as well as improved corrosion resistance. We Are most versatile and widely Supplier of 310H Stainless Steel Raised Face Flanges. The benefits of Our Stainless Steel Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost, Therefore contact us because We Are The Best SS 310H Socket Welding Flange (SWRF) Manufacturers In India.

Stockholder Of Stainless Steel 310H RTJ Flange, Best Price of 310H SS WNRF Flanges Exporter, Wrought Austenitic Stainless Steel 310H Industrial Flanges, ASME SA182M Steel 310H Class 300 Flange Wholesaler, SS Grade F310H Flat Flange, SS 310H EN 1092-1 Flanges Traders in India.

Table Of Contents

Specifications : ASTM A182 / A240 & ASME SA182 / SA240

Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size : 1/2" (15 NB) to 48" (1200NB)

Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)


ASTM A182 F310H Stainless Steel Pipe Flanges

Forged and Plate Flanges

Products Size
ASTM A182 SS 310H Slip-On Flanges ASTM A182 SS 310H Threaded Flanges Sizes 1/8″ – 36″
Raised Face or Flat Face
ASTM A182 SS 310H Weld Neck Flanges ASTM A182 SS 310H Socket Weld Flanges
ASTM A182 SS 310H Blind Flanges ASTM A182 SS 310H Reducing Flanges
ASTM A182 SS 310H Lap Joint Flanges ASTM A182 SS 310H Plate Flanges
ASTM A182 SS 310H Stainless Steel 310H Flanges ASTM A182 SS 310H Forged Flanges
ASTM A182 SS 310H Ring Type Joint Flanges ASTM A182 SS 310H Square Flanges
ASTM A182 STAINLESS STEEL 310H FLANGES MANUFACTURING STANDARDS :
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

ASTM A182 STAINLESS STEEL 310H FLANGES DIMENSIONS :

ASME B16.5 Stainless Steel 310H Flanges Dimension
ASME B16.5 Stainless Steel 310H Flanges Dimension

ASTM A182 STAINLESS STEEL 310H FLANGES SIZE CHART :

ASME B16.5 Stainless Steel 310H Flanges Size Chart
ASME B16.5 Stainless Steel 310H Flanges Size Chart

TYPES OF ASTM A182 STAINLESS STEEL 310H FLANGES

Visit Below Link For Respective Information :

Price List Of Stainless Steel Flanges In India

high quality ASME 310H stainless steel plate flange
US $0.15-10 / Piece
50 Pieces (Min. Order)
310H Stainless Steel Overpressure flange
US $1.37-3.7 / Piece
200 Pieces (Min. Order)
Custom Make 310H Stainless Steel Pipe Flange
US $10-60 / Kilogram
1000 Kilograms (Min. Order)
ANSI 310H stainless steel flat faced slip on flange
US $0.5-1000 / Piece
1 Piece (Min. Order)
Stainless Steel 310H DN80 PN16 Flange
US $0.1-2 / Piece
1 Piece (Min. Order)
high temperature forged 310H stainless steel flange
Customs Data
US $2000-3000 / Ton
0.5 Tons (Min. Order)
ANSI B16.5 Stainless Steel 310H 300LBS Flange RJT Flange WN Flange
US $0.2-10 / Piece
10 Pieces (Min. Order)
ASTM A403 310H Stainless Steel Loose Lap Joint Flange
US $1-100 / Piece
1 Piece (Min. Order)
310H stainless steel pipe flange
US $0.2-80 / Piece
50 Pieces (Min. Order)
310H weld neck pipe flange stainless steel forged flange
US $1.2-20 / Kilogram
1 Kilogram (Min. Order)
manufacturing carbon steel seamless pipes and pipe fittings forged 310H 316 stainless steel flange .
904L stainless steel flange / stainless steel flange
US $2-8 / Piece
1 Piece (Min. Order)
aisi 310H stainless steel blind flange from manufacture
US $1-300 / Piece
1 Piece (Min. Order)
Stainless Steel 310H Square Flange
US $3.5-5.5 / Piece
100 Pieces (Min. Order)
310H stainless steel pipe flange
US $1-100 / Piece
1 Piece (Min. Order)
Stainless steel raised face flange customizable
US $1-100 / Piece
10 Pieces (Min. Order)
Stainless Steel Blind Flange 310H Manufacturer
US $1-3 / Piece
1 Piece (Min. Order)
310H 6 inch 8 inch pipe flange stainless steel flange
US $1-10 / Piece
1 Piece (Min. Order)
ANSI 310H Stainless Steel Threaded Flange
US $10-200 / Piece
10 Pieces (Min. Order)
Stainless Steel 310H Slip Blind Flange
US $1-100 / Piece
1 Piece (Min. Order)
310H Stainless Steel Decorative Pipe Flange
US $0.5-70 / Piece
1 Piece (Min. Order)
Luxury Quality Oem/Odm Perfect After-Sale Service 310H Stainless Steel Flange Astm A351 Cf8
US $1.1-3.9 / Piece
100 Pieces (Min. Order)
ANSI B 16.5 310H stainless steel flange
US $1-20 / Piece
5 Pieces (Min. Order)

Stainless Steel 310H Flanges Available Types

Stainless Steel 310H Flanges Stainless Steel 310H EN 1092-1 Flanges
Stainless Steel 310H BS 4504 Flanges Stainless Steel 310H Flanges
Stainless Steel UNS S30400 Flanges Stainless Steel 310H Slip on Flanges
SS 310H Flat Flange Suppliers ANSI 310H Stainless Steel Blind Flange
SS 310H Weld Neck Flanges Dealer SS 310H Socket weld Flanges Exporter
SS 310H Long Weld Neck Flanges Stockholder Steel 310H Threaded Flanges Distributors
Stainless Steel SUS 310H Reducing Flanges SS 310H Ring Type Joint Flanges Manufacturer
Stainless Steel DIN 1.4301 Orifice Flange Stainless Steel BS 304S31 Spectacle Blind Flanges
Stainless Steel 310H WNRF Flange Stainless 310H SORF Flanges
ANSI B16.5 SS 310H RTJ Flanges SS 310H Screwed Flanges Stockist
ASTM A182 SS 310H Lap Joint Flanges ASME SA182 SS 310H BLRF Flange
Stainless Steel 310H Raised Face Flanges 310H SS Nipoflange
A182 SS 310H Square Flanges ASME SA182M SS 310H SWRF Flange
Steel 310H Tongue & Groove Flanges SS 310H Male & Female Flanges
Stainless Steel 310H DIN Flanges SS 310H ASME B16.5 Flanges

Stainless Steel Flanges Application

  • Stainless Steel 310H Flanges uses in Oil and Gas Pipeline
  • Stainless Steel 310H Flanges uses in Chemical Industry
  • Stainless Steel 310H Flanges uses in Plumbing
  • Stainless Steel 310H Flanges uses in Oil & Gas Industry
  • Stainless Steel 310H Flanges uses in Water Supply Systems
  • Stainless Steel 310H Flanges uses in Paper & Pulp Industry
  • Stainless Steel 310H Flanges uses in Power Plant
  • Stainless Steel 310H Flanges uses in Fabrication Industry
  • Stainless Steel 310H Flanges uses in General purpose applications
  • Stainless Steel 310H Flanges uses in Food Processing Industry
  • Stainless Steel 310H Flanges uses in Structural Pipe
  • Stainless Steel 310H Flanges uses in Heat Exchangers
ASME SA182 STAINLESS STEEL 310H FLANGES EQUIVALENT GRADES
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 - S31009 - - - - -

CHEMICAL COMPOSITION OF A182 STAINLESS STEEL 310H FLANGES
Grade C Mn Si P S Cr Mo Ni N
SS 310H 0.04 – 0.10 2.0 max 1.00 max 0.045 max 0.030 max 24.00 - 26.00 - 19.00 - 21.00 53.885 min

MECHANICAL PROPERTIES OF A182 STAINLESS STEEL 310H FLANGES
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %
Best Deals On Below Products:
Best Offers On Below Stock :
  • 310H Flanges
  • Stainless Steel 310H Flanges
  • 310H Stainless Steel Flanges
  • 310H Stainless Flanges
  • SS 310H Flanges
  • Alloy 310H Stainless Steel Flanges
  • AISI 310H Flanges
  • SUS 310H Flanges
  • INOX 310H Flanges
  • Alloy 310H Flanges
  • ASTM A182 Stainless Steel 310H Flanges
  • WNR 1.4301 Flanges
  • UNS N08904 Flanges
  • Super Austenitic 310H Flanges
  • Grade 310H Stainless Steel Flanges
  • Stainless Steel Flanges Grade 304
  • 310H Flanges
  • NAS 255 Flanges
  • SS DIN 1.4301 Flanges
  • URANUS B6 Flanges
  • VdTÜV 421 Flanges
  • BS 904S13 Flanges
  • SEW 400 Flanges
  • 2RK65 Flanges
  • KS STS 317J5L
  • RVS 310H Flanges
  • ASTM A182 F 310H Flanges
  • ASME SA182 Flanges
  • ASTM A182 UNS N08904 Flanges
  • ASME SA182 UNS N08904 Flanges
  • ANSI B16.5 SS 310H Flanges
  • ASTM A182 F310H Flanges
  • ASTM A182 F310H Flanges
  • 310H Stainless Steel Flanges
  • 310H Stainless Steel Threaded Flanges
  • 310H Stainless Steel Screwed Flanges
  • ASTM A182 F 310H 36" Flanges
  • ANSI B16.9 Flanges
  • BS10 Table D Flanges
  • Table E Flanges
  • DIN Standard Flanges
  • SS F310H Flanges
  • ASME SA182 Stainless Steel 310H Class 300 Flanges
  • 310H Stainless Steel Class 600 Flanges
  • SS 310H EN 1092-1 Flanges
  • SS 310H Industrial Flanges
  • 150# Stainless Steel 310H Flanges
  • 1500# Stainless Steel 310H Flanges
  • 2500# Stainless Steel 310H Flanges
  • ASTM A182 Stainless Steel Flanges
  • Stainless Steel 310H Flate Face Flanges
  • 310H Stainless Steel Raised Face Flanges
  • AWWA standard Stainless Steel Flanges
  • PN10 Stainless Steel Flanges
  • PN16 Stainless Steel Flanges
  • PN25 Stainless Steel Flanges
  • ASME B16.5 A182 F310H Flanges DN250 SCH100
  • DIN2576 A182 F310H Flanges PN10 DN25
  • DIN2576 A182 F310H Flanges PN10 DN250
  • ASME B16.5 A182 F310H Flanges DN500 CL150
  • ASME B16.5 A182 F310H Flanges DN25 SCH40S PN16
  • ASME B16.5 A182 F310H Flanges DN15 SCH40S PN16
  • ASME B16.5 A182 F310H Flanges DN40 SCH40S PN16
  • EN1092-1/01/B1 310H Flanges RF DN300 PN16
  • ASME B16.5 A182 F310H Flanges 4 Inch SCH40S
  • Stainless Steel 310H Flanges DN150 PN1.0
  • EN1092-1 Type 11 310H Flanges DN25 PN40 SCH40S
  • BS 4504 310H Flanges DN50 PN10
  • 310H Flanges 150LB 16 Inch
  • ASME B16.5 ASTM A182 F310H Flanges CL150 DN500
  • ASME B16.5 F310H Flanges 4 Inch 300LBS
  • A182 Stainless Steel 310H Flanges 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 310H Flanges 250 Lbs
  • ASTM A182 SS 310H 310H Slip On Flanges
  • ASTM A182 SS 310H 310H Socket Weld Flanges
  • ASTM A182 SS 310H 310H Blind Flanges
  • ASTM A182 SS 310H 310H Weld Neck Flanges
  • ASTM A182 SS 310H 310H Threaded / Screwed Flanges
  • ASTM A182 SS 310H 310H Lap Joint Flanges
  • ASTM A182 SS 310H 310H Long Weld Neck Flanges
  • ASTM A182 SS 310H 310H Spectacle Blind Flanges
  • ASTM A182 SS 310H 310H Plate Flanges
  • ASTM A182 SS 310H 310H Ring Type Joint Flanges
  • ASTM A182 SS 310H 310H Tongue & Groove Flanges
  • ASTM A182 SS 310H 310H Reducing Flanges
  • ASTM A182 SS 310H 310H Orifice Flanges
  • ASTM A182 SS 310H 310H Blank Flange
  • ASTM A182 SS 310H 310H Rotable Flange
  • ASTM A182 SS 310H 310H Welding FLange Rotable
  • ASTM A182 SS 310H 310H Flange with Tube
  • ASTM A182 SS 310H 310H Conflat Flanges
  • ASTM A182 SS 310H 310H Square Flanges
  • ASTM A182 SS 310H 310H Girth Flanges
  • ASTM A182 SS 310H 310H Anchor Flanges
  • ASTM A182 SS 310H 310H Screw Flabges
  • ASTM A182 SS 310H 310H Swivel Flanges
  • ASTM A182 SS 310H 310H ANSI 150 Flanges
  • ASTM A182 SS 310H 310H Spade Flanges
  • ASTM A182 SS 310H 310H Spacer Flanges
  • ASTM A182 SS 310H 310H Figure 8 Flanges
  • 310H Stainless Steel Compact flange
  • 310H Stainless Steel High Hub Flanges
  • EN1092-1/05/B1 310H BLIND FLANGE RF 1/2 INCH PN40
  • Grade F310H Stainless Steel Pipe Flanges
  • ANSI B16.5 ASTM A182 310H BLIND FLANGE RTJ 8 INCH SCH80 CL900
  • ANSI B16.5 ASTM A182 310H BLIND FLANGE RTJ 2 INCH SCH80 CL900
  • ANSI B16.5 ASTM A182 BLIND FLANGE DN300 CLASS300
  • ASTM A182 F310H BLIND FLANGE 600NB 300LB
  • ASME B16.5 A182 F310H WNRF Flange DN250 SCH100
  • DIN2576 A182 F310H SOFF Flange PN10 DN25
  • DIN2576 A182 F310H SOFF Flange PN10 DN250
  • ASME B16.5 A182 F310H SORF Flange DN500 CL150
  • ASME B16.5 A182 F310H WNRF Flange DN25 SCH40S PN16
  • ASME B16.5 A182 F310H WNRF Flange DN15 SCH40S PN16
  • ASME B16.5 A182 F310H WNRF Flange DN40 SCH40S PN16
  • EN1092-1/01/B1 310H Plate Flange RF DN300 PN16
  • ASME B16.5 A182 F310H WNRF Flange 4 Inch SCH40S
  • Stainless Steel 310H Flange Sight Glass DN150 PN1.0
  • EN1092-1 Type 11 310H WNRF Flange DN25 PN40 SCH40S
  • BS 4504 310H Plate Flange DN50 PN10
  • SS 310H backing flanges
  • 310H WNRF Flange 150LB 16 Inch
  • Stainless Steel 310H Long Weld Neck Flange
  • Stainless Steel 310H Blind Flange
  • Stainless Steel 310H Explosion Proof Pipeline Flame Arrester 4 Inch CL150
  • ASME B16.5 ASTM A182 F310H SORF Flange CL150 DN500
  • ASME B16.5 F310H WNRF Flange 4 Inch 300LBS
  • A182 Stainless Steel 310H WNRTJ Flange 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 310H Lap Joint Flange 250 Lbs
  • 310H Flange Bolted Weld-On
  • Stainless Steel 310H Flanges
  • SS 310H Flange
  • 310H Stainless Steel Flanges
  • 310H SS Flanges
  • Stainless Steel 310H Pipe Flanges Manufacturers
  • SS UNS N08904 Plate Flanges
  • Stainless Steel 310H Slip On Flanges
  • Stainless Steel DIN 1.4301 Weld Neck Flanges
  • 150# Stainless Steel 310H Flanges
  • 300# Stainless Steel 310H Flanges
  • 600# Stainless Steel 310H Flanges
  • 1500# Stainless Steel 310H Flanges
  • 2500# Stainless Steel 310H Flanges
  • ASTM A182 F310H Stainless Steel Blind Flange
  • SS 310H Socket Weld Flanges Dealer
  • SS 310H Threaded Flanges
  • ASTM A182 310H Stainless Steel Lap Joint Flanges Stockist
  • SS 310H Long Weld Neck Flanges
  • SS 310H WNRF Flange
  • 310H SS BLRF Flanges
  • SS 310H Reducing Flanges
  • 310H SS Orifice Flanges
  • Stainless Steel 310H Ring Type Joint Flanges
  • ASME SA182 SS 310H Square Flanges
  • SS 310H Screwed Flanges
  • Steel 310H Flanges
  • SS 310H Flange Price
  • SS 310H Pipe Flanges Price List
  • SS 310H Flanges Dimensions
  • ANSI B16.5 SS 310H Groove & Tongue Flanges
  • ASME B16.47 Welding Neck Flanges
  • Stainless Steel 310H High Hub Blind Flange
  • Stainless Steel 310H Spectacle Blind Flanges Supplier
  • Stainless Steel 310H Weldo / Nipo Flanges Exporter
  • SS 310H Expander Flanges Stockholders
  • Stainless Steel 310H SORF Flanges
  • 310H SAE J518 Split Flange
  • Stainless Steel 310H Blind Flange
  • 310H Stainless Steel NPTF Thread Flange
  • 310H Stainless Steel BSPP Thread Flange
  • 310H Stainless Steel Socket Weld Flange
  • 310H Square Weld Flange
  • Stainless Steel Solid Flange
  • Alloy 310H Stainless Steel Weld Round Flange
  • Alloy 310H Stainless Steel Egg-Shaped Flange
  • Alloy 310H Stainless Steel Din Standard Flange
  • 310H Flange Assemnly
  • Alloy 310H Stainless Steel Blind Large Diameter Flanges
  • Alloy 310H Stainless Steel RTJ Flanges
  • AISI 310H Flanges
  • AISI 310H flanges ANSI B16 5
  • ASME B16.5 SS 310H SORF
  • ASME B16.5 SS 310H SOFF
  • ASME B16.5 SS 310H BLRF
  • ASME B16.5 SS 310H BLFF
  • ASME B16.5 SS 310H WNRF
  • ASME B16.5 SS 310H WNFF
  • ASME B16.5 SS 310H SWRF
  • ASME B16.5 SS 310H SWFF
  • ASME B16.5 SS 310H Threaded RF
  • ASME B16.5 SS 310H Threaded FF
  • ASME B16.5 SS 310H Threaded LJ
  • ASME B16.47 SS 310H SORF
  • ASME B16.47 SS 310H SOFF
  • ASME B16.47 SS 310H BLRF
  • ASME B16.47 SS 310H BLFF
  • ASME B16.47 SS 310H WNRF
  • ASME B16.47 SS 310H WNFF
  • ASME B16.47 SS 310H SWRF
  • ASME B16.47 SS 310H SWFF
  • ASME B16.47 SS 310H Threaded RF
  • ASME B16.47 SS 310H Threaded FF
  • ASME B16.47 SS 310H Threaded LJ