ASTM A182 Stainless Steel 304H Flanges Manufacturer In India

ASTM A182 Stainless Steel 304H Flanges

Manufacturer Of ASTM A182 304H SS Plate Flange, Werkstoff No 1.4309 SS Socket Weld Flanges, 304H SS Lapped joint Flanges, SS ASTM A182 F304H Threaded Flanges, ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 Stainless Steel 304H Forged Flanges in Mumbai, India.

Stockist of SS 304H Slip On Flanges, SS UNS S30409 Pipe Flanges, Global Supplier of SS 304H Weld Neck Flange, SS F304H Flange, Stainless Steel 304H Flanges, SS 304H Blind Flanges Dealer in India, ANSI B16.5 SS 304H Orifice Flanges, BS10 Table D, Table E, DIN Standard Flanges.

Regal Sales Corporation is one of the recommended manufacturer Of ASTM A182 Stainless Steel 304H Flanges In India. Our Stainless Steel 304H Flanges is the modern evolution of the original. “18-8” austenitic stainless steel flange. Type SS 304H Lap Joint Flanges is a modification of Type 304 with carbon content controlled in the range which has a minimum of 18% chromium and 8% nickel. Type Stainless Steel 304H Blind Flanges (BLRF) has a carbon maximum is 0.030. Stainless Steel 304H Plate Flanges is the standard “18/8 stainless” that is commonly found in pans and cooking tools. 304H Stainless Steel Slip On Flange (SORF) is the most versatile and widely used alloy 304H Flat Face Flange is mostly used in the stainless steel flange family.

The ultimate tensile strength (UTS) of SS 304H Spectacle Blind Flange is roughly 85 ksi (~586 MPa),304H having a 0.2% yield strength of 35 ksi (~241 MPa).The carbon ranges are 0.08% maximum for the SS 304H Threaded Flange. All other element ranges are essentially the same (nickel range for 304 is 8.00-10.50% and for SS 304H Welding Neck Flange(WNRF) 8.00-12.00%).

304H Stainless Steel Collar Flange, also known as 18/8 Stainless Flange, is the most common stainless steel flange. SS 304H Ring Type Joint Flange (RTJ) (austenitic stainless steel) is a low carbon version of 304 and is melted as AOD, AOD + VAR, or VIM + VAR melt type. This grade offers a good combination of strength, corrosion resistance, and fabricability. The low carbon helps improve weldability as compared to the 304 as well as improved corrosion resistance. We Are most versatile and widely Supplier of 304H Stainless Steel Raised Face Flanges. The benefits of Our Stainless Steel Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost, Therefore contact us because We Are The Best SS 304H Socket Welding Flange (SWRF) Manufacturers In India.

Stockholder Of Stainless Steel 304H RTJ Flange, Best Price of 304H SS WNRF Flanges Exporter, Wrought Austenitic Stainless Steel 304H Industrial Flanges, ASME SA182M Steel 304H Class 300 Flange Wholesaler, SS Grade F304H Flat Flange, SS 304H EN 1092-1 Flanges Traders in India.

Table Of Contents

Specifications : ASTM A182 / A240 & ASME SA182 / SA240

Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.

Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

Size : 1/2" (15 NB) to 48" (1200NB)

Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)


ASTM A182 F304H Stainless Steel Pipe Flanges

Forged and Plate Flanges

Products Size
ASTM A182 SS 304H Slip-On Flanges ASTM A182 SS 304H Threaded Flanges Sizes 1/8″ – 36″
Raised Face or Flat Face
ASTM A182 SS 304H Weld Neck Flanges ASTM A182 SS 304H Socket Weld Flanges
ASTM A182 SS 304H Blind Flanges ASTM A182 SS 304H Reducing Flanges
ASTM A182 SS 304H Lap Joint Flanges ASTM A182 SS 304H Plate Flanges
ASTM A182 SS 304H Stainless Steel 304H Flanges ASTM A182 SS 304H Forged Flanges
ASTM A182 SS 304H Ring Type Joint Flanges ASTM A182 SS 304H Square Flanges
ASTM A182 STAINLESS STEEL 304H FLANGES MANUFACTURING STANDARDS :
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

ASTM A182 STAINLESS STEEL 304H FLANGES DIMENSIONS :

ASME B16.5 Stainless Steel 304H Flanges Dimension
ASME B16.5 Stainless Steel 304H Flanges Dimension

ASTM A182 STAINLESS STEEL 304H FLANGES SIZE CHART :

ASME B16.5 Stainless Steel 304H Flanges Size Chart
ASME B16.5 Stainless Steel 304H Flanges Size Chart

TYPES OF ASTM A182 STAINLESS STEEL 304H FLANGES

Visit Below Link For Respective Information :

Price List Of Stainless Steel Flanges In India

high quality ASME 304H stainless steel plate flange
US $0.15-10 / Piece
50 Pieces (Min. Order)
304H Stainless Steel Overpressure flange
US $1.37-3.7 / Piece
200 Pieces (Min. Order)
Custom Make 304H Stainless Steel Pipe Flange
US $10-60 / Kilogram
1000 Kilograms (Min. Order)
ANSI 304H stainless steel flat faced slip on flange
US $0.5-1000 / Piece
1 Piece (Min. Order)
Stainless Steel 304H DN80 PN16 Flange
US $0.1-2 / Piece
1 Piece (Min. Order)
high temperature forged 304H stainless steel flange
Customs Data
US $2000-3000 / Ton
0.5 Tons (Min. Order)
ANSI B16.5 Stainless Steel 304H 300LBS Flange RJT Flange WN Flange
US $0.2-10 / Piece
10 Pieces (Min. Order)
ASTM A403 304H Stainless Steel Loose Lap Joint Flange
US $1-100 / Piece
1 Piece (Min. Order)
304H stainless steel pipe flange
US $0.2-80 / Piece
50 Pieces (Min. Order)
304H weld neck pipe flange stainless steel forged flange
US $1.2-20 / Kilogram
1 Kilogram (Min. Order)
manufacturing carbon steel seamless pipes and pipe fittings forged 304H 316 stainless steel flange .
904L stainless steel flange / stainless steel flange
US $2-8 / Piece
1 Piece (Min. Order)
aisi 304H stainless steel blind flange from manufacture
US $1-300 / Piece
1 Piece (Min. Order)
Stainless Steel 304H Square Flange
US $3.5-5.5 / Piece
100 Pieces (Min. Order)
304H stainless steel pipe flange
US $1-100 / Piece
1 Piece (Min. Order)
Stainless steel raised face flange customizable
US $1-100 / Piece
10 Pieces (Min. Order)
Stainless Steel Blind Flange 304H Manufacturer
US $1-3 / Piece
1 Piece (Min. Order)
304H 6 inch 8 inch pipe flange stainless steel flange
US $1-10 / Piece
1 Piece (Min. Order)
ANSI 304H Stainless Steel Threaded Flange
US $10-200 / Piece
10 Pieces (Min. Order)
Stainless Steel 304H Slip Blind Flange
US $1-100 / Piece
1 Piece (Min. Order)
304H Stainless Steel Decorative Pipe Flange
US $0.5-70 / Piece
1 Piece (Min. Order)
Luxury Quality Oem/Odm Perfect After-Sale Service 304H Stainless Steel Flange Astm A351 Cf8
US $1.1-3.9 / Piece
100 Pieces (Min. Order)
ANSI B 16.5 304H stainless steel flange
US $1-20 / Piece
5 Pieces (Min. Order)

Stainless Steel 304H Flanges Available Types

Stainless Steel 304H Flanges Stainless Steel 304H EN 1092-1 Flanges
Stainless Steel 304H BS 4504 Flanges Stainless Steel 304H Flanges
Stainless Steel UNS S30400 Flanges Stainless Steel 304H Slip on Flanges
SS 304H Flat Flange Suppliers ANSI 304H Stainless Steel Blind Flange
SS 304H Weld Neck Flanges Dealer SS 304H Socket weld Flanges Exporter
SS 304H Long Weld Neck Flanges Stockholder Steel 304H Threaded Flanges Distributors
Stainless Steel SUS 304H Reducing Flanges SS 304H Ring Type Joint Flanges Manufacturer
Stainless Steel DIN 1.4301 Orifice Flange Stainless Steel BS 304S31 Spectacle Blind Flanges
Stainless Steel 304H WNRF Flange Stainless 304H SORF Flanges
ANSI B16.5 SS 304H RTJ Flanges SS 304H Screwed Flanges Stockist
ASTM A182 SS 304H Lap Joint Flanges ASME SA182 SS 304H BLRF Flange
Stainless Steel 304H Raised Face Flanges 304H SS Nipoflange
A182 SS 304H Square Flanges ASME SA182M SS 304H SWRF Flange
Steel 304H Tongue & Groove Flanges SS 304H Male & Female Flanges
Stainless Steel 304H DIN Flanges SS 304H ASME B16.5 Flanges

Stainless Steel Flanges Application

  • Stainless Steel 304H Flanges uses in Oil and Gas Pipeline
  • Stainless Steel 304H Flanges uses in Chemical Industry
  • Stainless Steel 304H Flanges uses in Plumbing
  • Stainless Steel 304H Flanges uses in Oil & Gas Industry
  • Stainless Steel 304H Flanges uses in Water Supply Systems
  • Stainless Steel 304H Flanges uses in Paper & Pulp Industry
  • Stainless Steel 304H Flanges uses in Power Plant
  • Stainless Steel 304H Flanges uses in Fabrication Industry
  • Stainless Steel 304H Flanges uses in General purpose applications
  • Stainless Steel 304H Flanges uses in Food Processing Industry
  • Stainless Steel 304H Flanges uses in Structural Pipe
  • Stainless Steel 304H Flanges uses in Heat Exchangers
ASME SA182 304H STAINLESS STEEL FLANGES EQUIVALENT GRADES
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304H 1.4948 S30403 SUS 304H 304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11

CHEMICAL COMPOSITION OF A182 STAINLESS STEEL 304H FLANGES
Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.035 max 2.0 max 1.0 max 0.045 max 0.03 max 18 – 20 - 8 – 13 -

MECHANICAL PROPERTIES OF A182 STAINLESS STEEL 304H FLANGES
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Best Deals On Below Products:
Best Offers On Below Stock :
  • 304H Flanges
  • Stainless Steel 304H Flanges
  • 304H Stainless Steel Flanges
  • 304H Stainless Flanges
  • SS 304H Flanges
  • Alloy 304H Stainless Steel Flanges
  • AISI 304H Flanges
  • SUS 304H Flanges
  • INOX 304H Flanges
  • Alloy 304H Flanges
  • ASTM A182 Stainless Steel 304H Flanges
  • WNR 1.4301 Flanges
  • UNS N08904 Flanges
  • Super Austenitic 304H Flanges
  • Grade 304H Stainless Steel Flanges
  • Stainless Steel Flanges Grade 304
  • 304H Flanges
  • NAS 255 Flanges
  • SS DIN 1.4301 Flanges
  • URANUS B6 Flanges
  • VdTÜV 421 Flanges
  • BS 904S13 Flanges
  • SEW 400 Flanges
  • 2RK65 Flanges
  • KS STS 317J5L
  • RVS 304H Flanges
  • ASTM A182 F 304H Flanges
  • ASME SA182 Flanges
  • ASTM A182 UNS N08904 Flanges
  • ASME SA182 UNS N08904 Flanges
  • ANSI B16.5 SS 304H Flanges
  • ASTM A182 F304H Flanges
  • ASTM A182 F304H Flanges
  • 304H Stainless Steel Flanges
  • 304H Stainless Steel Threaded Flanges
  • 304H Stainless Steel Screwed Flanges
  • ASTM A182 F 304H 36" Flanges
  • ANSI B16.9 Flanges
  • BS10 Table D Flanges
  • Table E Flanges
  • DIN Standard Flanges
  • SS F304H Flanges
  • ASME SA182 Stainless Steel 304H Class 300 Flanges
  • 304H Stainless Steel Class 600 Flanges
  • SS 304H EN 1092-1 Flanges
  • SS 304H Industrial Flanges
  • 150# Stainless Steel 304H Flanges
  • 1500# Stainless Steel 304H Flanges
  • 2500# Stainless Steel 304H Flanges
  • ASTM A182 Stainless Steel Flanges
  • Stainless Steel 304H Flate Face Flanges
  • 304H Stainless Steel Raised Face Flanges
  • AWWA standard Stainless Steel Flanges
  • PN10 Stainless Steel Flanges
  • PN16 Stainless Steel Flanges
  • PN25 Stainless Steel Flanges
  • ASME B16.5 A182 F304H Flanges DN250 SCH100
  • DIN2576 A182 F304H Flanges PN10 DN25
  • DIN2576 A182 F304H Flanges PN10 DN250
  • ASME B16.5 A182 F304H Flanges DN500 CL150
  • ASME B16.5 A182 F304H Flanges DN25 SCH40S PN16
  • ASME B16.5 A182 F304H Flanges DN15 SCH40S PN16
  • ASME B16.5 A182 F304H Flanges DN40 SCH40S PN16
  • EN1092-1/01/B1 304H Flanges RF DN300 PN16
  • ASME B16.5 A182 F304H Flanges 4 Inch SCH40S
  • Stainless Steel 304H Flanges DN150 PN1.0
  • EN1092-1 Type 11 304H Flanges DN25 PN40 SCH40S
  • BS 4504 304H Flanges DN50 PN10
  • 304H Flanges 150LB 16 Inch
  • ASME B16.5 ASTM A182 F304H Flanges CL150 DN500
  • ASME B16.5 F304H Flanges 4 Inch 300LBS
  • A182 Stainless Steel 304H Flanges 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 304H Flanges 250 Lbs
  • ASTM A182 SS 304H 304H Slip On Flanges
  • ASTM A182 SS 304H 304H Socket Weld Flanges
  • ASTM A182 SS 304H 304H Blind Flanges
  • ASTM A182 SS 304H 304H Weld Neck Flanges
  • ASTM A182 SS 304H 304H Threaded / Screwed Flanges
  • ASTM A182 SS 304H 304H Lap Joint Flanges
  • ASTM A182 SS 304H 304H Long Weld Neck Flanges
  • ASTM A182 SS 304H 304H Spectacle Blind Flanges
  • ASTM A182 SS 304H 304H Plate Flanges
  • ASTM A182 SS 304H 304H Ring Type Joint Flanges
  • ASTM A182 SS 304H 304H Tongue & Groove Flanges
  • ASTM A182 SS 304H 304H Reducing Flanges
  • ASTM A182 SS 304H 304H Orifice Flanges
  • ASTM A182 SS 304H 304H Blank Flange
  • ASTM A182 SS 304H 304H Rotable Flange
  • ASTM A182 SS 304H 304H Welding FLange Rotable
  • ASTM A182 SS 304H 304H Flange with Tube
  • ASTM A182 SS 304H 304H Conflat Flanges
  • ASTM A182 SS 304H 304H Square Flanges
  • ASTM A182 SS 304H 304H Girth Flanges
  • ASTM A182 SS 304H 304H Anchor Flanges
  • ASTM A182 SS 304H 304H Screw Flabges
  • ASTM A182 SS 304H 304H Swivel Flanges
  • ASTM A182 SS 304H 304H ANSI 150 Flanges
  • ASTM A182 SS 304H 304H Spade Flanges
  • ASTM A182 SS 304H 304H Spacer Flanges
  • ASTM A182 SS 304H 304H Figure 8 Flanges
  • 304H Stainless Steel Compact flange
  • 304H Stainless Steel High Hub Flanges
  • EN1092-1/05/B1 304H BLIND FLANGE RF 1/2 INCH PN40
  • Grade F304H Stainless Steel Pipe Flanges
  • ANSI B16.5 ASTM A182 304H BLIND FLANGE RTJ 8 INCH SCH80 CL900
  • ANSI B16.5 ASTM A182 304H BLIND FLANGE RTJ 2 INCH SCH80 CL900
  • ANSI B16.5 ASTM A182 BLIND FLANGE DN300 CLASS300
  • ASTM A182 F304H BLIND FLANGE 600NB 300LB
  • ASME B16.5 A182 F304H WNRF Flange DN250 SCH100
  • DIN2576 A182 F304H SOFF Flange PN10 DN25
  • DIN2576 A182 F304H SOFF Flange PN10 DN250
  • ASME B16.5 A182 F304H SORF Flange DN500 CL150
  • ASME B16.5 A182 F304H WNRF Flange DN25 SCH40S PN16
  • ASME B16.5 A182 F304H WNRF Flange DN15 SCH40S PN16
  • ASME B16.5 A182 F304H WNRF Flange DN40 SCH40S PN16
  • EN1092-1/01/B1 304H Plate Flange RF DN300 PN16
  • ASME B16.5 A182 F304H WNRF Flange 4 Inch SCH40S
  • Stainless Steel 304H Flange Sight Glass DN150 PN1.0
  • EN1092-1 Type 11 304H WNRF Flange DN25 PN40 SCH40S
  • BS 4504 304H Plate Flange DN50 PN10
  • SS 304H backing flanges
  • 304H WNRF Flange 150LB 16 Inch
  • Stainless Steel 304H Long Weld Neck Flange
  • Stainless Steel 304H Blind Flange
  • Stainless Steel 304H Explosion Proof Pipeline Flame Arrester 4 Inch CL150
  • ASME B16.5 ASTM A182 F304H SORF Flange CL150 DN500
  • ASME B16.5 F304H WNRF Flange 4 Inch 300LBS
  • A182 Stainless Steel 304H WNRTJ Flange 1500LB 8 Inch
  • ANSI B16.5 Stainless Steel 304H Lap Joint Flange 250 Lbs
  • 304H Flange Bolted Weld-On
  • Stainless Steel 304H Flanges
  • SS 304H Flange
  • 304H Stainless Steel Flanges
  • 304H SS Flanges
  • Stainless Steel 304H Pipe Flanges Manufacturers
  • SS UNS N08904 Plate Flanges
  • Stainless Steel 304H Slip On Flanges
  • Stainless Steel DIN 1.4301 Weld Neck Flanges
  • 150# Stainless Steel 304H Flanges
  • 300# Stainless Steel 304H Flanges
  • 600# Stainless Steel 304H Flanges
  • 1500# Stainless Steel 304H Flanges
  • 2500# Stainless Steel 304H Flanges
  • ASTM A182 F304H Stainless Steel Blind Flange
  • SS 304H Socket Weld Flanges Dealer
  • SS 304H Threaded Flanges
  • ASTM A182 304H Stainless Steel Lap Joint Flanges Stockist
  • SS 304H Long Weld Neck Flanges
  • SS 304H WNRF Flange
  • 304H SS BLRF Flanges
  • SS 304H Reducing Flanges
  • 304H SS Orifice Flanges
  • Stainless Steel 304H Ring Type Joint Flanges
  • ASME SA182 SS 304H Square Flanges
  • SS 304H Screwed Flanges
  • Steel 304H Flanges
  • SS 304H Flange Price
  • SS 304H Pipe Flanges Price List
  • SS 304H Flanges Dimensions
  • ANSI B16.5 SS 304H Groove & Tongue Flanges
  • ASME B16.47 Welding Neck Flanges
  • Stainless Steel 304H High Hub Blind Flange
  • Stainless Steel 304H Spectacle Blind Flanges Supplier
  • Stainless Steel 304H Weldo / Nipo Flanges Exporter
  • SS 304H Expander Flanges Stockholders
  • Stainless Steel 304H SORF Flanges
  • 304H SAE J518 Split Flange
  • Stainless Steel 304H Blind Flange
  • 304H Stainless Steel NPTF Thread Flange
  • 304H Stainless Steel BSPP Thread Flange
  • 304H Stainless Steel Socket Weld Flange
  • 304H Square Weld Flange
  • Stainless Steel Solid Flange
  • Alloy 304H Stainless Steel Weld Round Flange
  • Alloy 304H Stainless Steel Egg-Shaped Flange
  • Alloy 304H Stainless Steel Din Standard Flange
  • 304H Flange Assemnly
  • Alloy 304H Stainless Steel Blind Large Diameter Flanges
  • Alloy 304H Stainless Steel RTJ Flanges
  • AISI 304H Flanges
  • AISI 304H flanges ANSI B16 5
  • ASME B16.5 SS 304H SORF
  • ASME B16.5 SS 304H SOFF
  • ASME B16.5 SS 304H BLRF
  • ASME B16.5 SS 304H BLFF
  • ASME B16.5 SS 304H WNRF
  • ASME B16.5 SS 304H WNFF
  • ASME B16.5 SS 304H SWRF
  • ASME B16.5 SS 304H SWFF
  • ASME B16.5 SS 304H Threaded RF
  • ASME B16.5 SS 304H Threaded FF
  • ASME B16.5 SS 304H Threaded LJ
  • ASME B16.47 SS 304H SORF
  • ASME B16.47 SS 304H SOFF
  • ASME B16.47 SS 304H BLRF
  • ASME B16.47 SS 304H BLFF
  • ASME B16.47 SS 304H WNRF
  • ASME B16.47 SS 304H WNFF
  • ASME B16.47 SS 304H SWRF
  • ASME B16.47 SS 304H SWFF
  • ASME B16.47 SS 304H Threaded RF
  • ASME B16.47 SS 304H Threaded FF
  • ASME B16.47 SS 304H Threaded LJ